-
SFP (1.25G) module, 550m, Multi Mode S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. -
RJ45 SFP 10/100/1000M copper module S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately. -
SFP CWDM module 1.25G 40km 1530nm Dual LC-connector DDM -
Black aluminium indoor, Fits RB433 series and RBM33G Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products and RBM33G -
The most affordable 60 GHz CPE for crowded wireless spectrum 60 GHz networking is no longer a privilege – with our new Cube Lite60 CPE you can run extremely cost-effective setups in situations with enterprise-level demands: shopping malls, stadiums, industrial parks, busy urban areas and so on. Same price as SXTsq, 4x the distance! Connect up to eight of these units to a 60 GHz access point, such as our wAP 60G AP or wAP 60Gx3 AP, and enjoy smooth and stable wireless signal without interference from all the 2.4/5 GHz networks. Cube Lite60 is designed to be less visible than a traditional dish CPE, but make no mistake – it’s still a real powerhouse. The effective point-to-point distance between Cube Lite60 units is up to 800 meters, point-to-multipoint – up to 500 meters. No need to share frequency with your neighbors – choose 60 GHz, almost like taking a helicopter during a traffic jam! -
IoT Gateway for the most versatile and cost-effective setups The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supported by countless mobile operators around the globe. KNOT can monitor onboard GPIOs, convert Modbus protocol to TCP, and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes, the KNOT brings wireless connectivity to wired sensors, such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. Why spend extra money on bandwidth you don’t need? For example, you can manage a KNOT-powered vending machine with temperature and liquid sensors with only a few megabytes per day! -
Power adapter with PWR-LINE functionality for microUSB powered MikroTik router (Type A power plug) PL6400 is designed for MikroTik products with microUSB port, like hAP mini or hAP lite. Connect PL6400 to your electrical outlet and then connect the USB cable to power your supported MikroTik device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the devices will form a connection without needing to install any LAN cables. Comes with Type A power plug (commonly used in USA, Canada, Mexico, Thailand etc) -
Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ 10Gbps cage, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop case RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot. -
A wireless dual-band router with LTE support and 5 Gigabit Ethernet ports. The right choice for most homes Forget about endless searching for the perfect router and scrolling through an eternity of reviews and specifications! We have created a single affordable home access point that has all the features you might need for years to come. hAP ac³ LTE6 kit features our newest CAT6 LTE modem. It enables carrier aggregation, allowing you to use the LTE connection with speed up to 300 Mbps. It works by using multiple LTE bands at the same time. A huge advantage when there are a lot of LTE users in the area. Depending on the service provider, we have seen Internet speed doubling after switching to CAT6. With 5 Gigabit Ethernet ports, 256 MB of RAM and quadcore CPU, hAP ac³ LTE6 kit can satisfy even the biggest and most demanding households. There is a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included. Stop sharing the frequency with all your neighbors! Strong dual-chain dual-band 2.4/5 GHz wireless for concurrent coverage will solve most interference issues in a crowded environment. This is a must-have these days! You can use the 2.4 GHz channel for older devices and the 5 GHz channel for everything else, since this frequency is less cluttered -
2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. -
Tiny size home 2.4Ghz AP with three LAN portsThe hAP mini is a small 2GHz wireless access point for home or small offices. It has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options. The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it. -
Dual chain 24.5dBi 5GHz CPE/Point-to-Point Integrated Antenna with AC support and Gigabit EthernetThe LHG 5 ac is a compact and light 5GHz 802.11ac wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. - LHG 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- LHG 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
