- High-speed Internet access
- Video stream, High Definition TV, IPTV, Video on Demand (VoD), video conference
- Online educational and entertainment programmes
- 1 GPON port
- Gigabit router
- RF port for CaTV service providing
-
NTU series ONT are high performance multifunctional subscriber terminals that are designed to provide access to modern telephony, IPTV, OTT services as well as high-speed Internet. PON technology PON technology - one of the most effective last mile solutions today. The technology helps to reduce costs for cable infrastructure and ensures data rates of 2.5 Gbps downlink and 1.25 Gbps uplink. The use of PON technology in access networks allows providing end users with access to IP services. Provided services -
5x Gigabit Ethernet Smart Switch, SFP cage, plastic case, SwOS The RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It is powered by an operating system designed specifically for MikroTik Switch products - SwOS. SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. -
SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. -
Details- 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
- 80,000 PPS
- 170 Mbps capacity
- High output power 29 dBm radio
- Integrated dual-polarized 20 dBi directional panel antenna
- Powerful OS
- Smart polling data transmission protocol (iPoll 3)
- Meets IP-66 certification
- Free NMS (Infinity Controller)
- Responsive HTML 5 based GUI
- Wall and pole mounting option
-
DragonWave Harmony Enhanced is a high capacity, long reach, multi-service radio operating in the 6-42 GHz spectrum bands. -
AERO HCR provides 50 years MTBF and can be configured in 1+1 for increased link reliability. It supports Adaptive Coding and Modulation for backup failure in case of strong rain or desert storms and enhanced error correction such as LDPC. AERO HCR is protected against hackers with AES encryption on the link for data security and SNMP Version 3 support for access security.3Roam’s AERO HCRs are synchronized through the network for clock sensitive applications such as mobile traffic. -
Enterprise IP PBX SMG-200 is a telecom grade device that connects up to 100 SIP subscribers in basic configuration and can be extended to 200 SIP subscribers when acquiring appropriate license. 16 RJ-11 ports can be used for analogue phones connection as well as for connection to land lines. The LAN ports are dedicated to carriers connection via SIP trunks and for extension of FXS/FXO ports quantity via VoIP gateways (e.g. you can use TAU-24 which has 24 FXS ports). Call records and CDR files are stored on SD card or USB flash drive. It is also possible to upload files to FTP server automatically. Key Benefits- IP PBX for up to 200 subscribers
- Up to 50 simultaneous calls
- Up to 16 FXS/FXO ports
- 4 LAN ports
- Call-center functionality
- Call recording
-
The most affordable 60 GHz CPE for crowded wireless spectrum 60 GHz networking is no longer a privilege – with our new Cube Lite60 CPE you can run extremely cost-effective setups in situations with enterprise-level demands: shopping malls, stadiums, industrial parks, busy urban areas and so on. Same price as SXTsq, 4x the distance! Connect up to eight of these units to a 60 GHz access point, such as our wAP 60G AP or wAP 60Gx3 AP, and enjoy smooth and stable wireless signal without interference from all the 2.4/5 GHz networks. Cube Lite60 is designed to be less visible than a traditional dish CPE, but make no mistake – it’s still a real powerhouse. The effective point-to-point distance between Cube Lite60 units is up to 800 meters, point-to-multipoint – up to 500 meters. No need to share frequency with your neighbors – choose 60 GHz, almost like taking a helicopter during a traffic jam! -
500+ Mbps base-station ▪️ 500+ Mbps throughput - the result of a powerful hardware platform with an 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). ▪️ Incorporating a QCA 9557 CPU (720 MHz), a QCA 9882 radio and 128 MBytes of RAM/Flash memory the LigoDLB ac PRO series access points are an ideal solution for resource demanding installations. ▪️ State of the art RF design with great output power and sensitivity parameters improve range and capacity over the highest modulation - 256 QAM. The 48V Gigabit Ethernet port (802.3af) allows utilizing the full capacity of the base-station. ▪️ LigoDLBac series devices are backwards compatible with LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks with the latest technologies over time. -
Extending the service provider’s indoor reach and streamlining components for a simplified indoor network. Versatile multi-function WLAN access points, offering remote visibility and end-to-end troubleshooting, extend the service provider’s indoor reach. -
Microwave radio always played a key role in mobile backhauling, becoming the predominant technology in use. With the evolution of mobile technology, microwave radio has evolved to t those requirements, always oering new and innovative way to enable fast RAN deployments. ALFOplus2 is the next generation 2/4 Gbps full outdoor solution to enable successful launch of LTE, by providing best TCO while boosting capacity and availability of the network. -
The Eltex NV IPTV set-top box on Android provides services on a new level. It is a perfect tool for promotion of IPTV services and acquisition of new customers. Android Platform Android serves as a single universal platform to provide access to services and functions with a familiar interface such as AndroidTV. Creation of a Customised Application Store It provides an open platform and development tools (SDK, API) for quick creation of new operator services. Advantages of the Hardware A dual core Realtek processor supports a wide range of video and audio formats. Advanced Wi-Fi Technologies NV-501-Wa supports all up-to-date Wi-Fi standards: 802.11a/b/g/n/ас. A capability of stable real-time traffic transfer is implemented. Wi-Fi Client support ensures NV-501-Wac connection to an external network via a wireless channel. Key benefits- Realtek RTD1195C chipset
- ARM architecture
- 2D/3D acceleration, OpenGL support
- Android 4.4
- Peer-to-peer
- Application store
- Support of widely used middleware
- Android API,SDK
- Java Script API, SDK
- H.265 support
- 4Kp30 decoding
- Wi-Fi 802.11a/b/g/n/ac
- Access point mode