-
The OptiX RTN 950 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
-
The OptiX RTN 980 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
-
RTN 905 is ready for a variety of synchronization scenarios, no matter RTN alone or synergy with other venders,It Supports the following clock:
- PDH tributary clock
- Radio link clock
- TDM cascading interface clock
- 2048 kbit/s or 2048 kHz external clock
- Synchronous Ethernet clock
- IEEE 1588 V2(TC/BC)
-
The OptiX RTN 910 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:
- 4хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:
- 8хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
OLT MA4000-PX
$728.91Multi-service access and aggregation node MA4000-PX allows to construct access networks based on GPON technology. The OLT allows an operator to construct scalable, failsafe "last mile" networks, ensuring high safety requirements in either urban or rural areas. MA4000-PX controls customer stations, traffic switching and transport network access.A core element of the MA4000-PX is a scalable Ethernet L2+ switch (PP4X) that interacts with optical interface access modules PLC8 to connect customer devices via GPON technology.The modules are installed in a standard 19" 9U Eurocase. The 9U case has two slots for PP4X switch circuit control modules installation and 16 slots for linear PCL8 modules (GPON). A single system can have one or two PP4X central switch control modules.Types of modules- PP4X: switching and control module
- PLC8: 8 x GPON 2,5Gbps interface module
- The quantity of interface modules: up to 16
- Bus type and performance: 34х10GBASE-KX (XAUI), 680Gbps
- Single management interface via CLI (Telnet, SSH, serial), SNMP
- Processing of configuration data of all modules
- Support for RADIUS, TACACS+
-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile”solution. This solution reduces the amount of cables and provides data transfer with downlink rate up to 2.5Gbps and uplink rate up to 1.25Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Supported services High-speed Internet access Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing VoIP Online educational and entertainment programs Applications Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
-
NTU series ONT are high performance multifunctional subscriber terminals that are designed to provide access to modern telephony, IPTV, OTT services as well as high-speed Internet. PON technology PON technology - one of the most effective last mile solutions today. The technology helps to reduce costs for cable infrastructure and ensures data rates of 2.5 Gbps downlink and 1.25 Gbps uplink. The use of PON technology in access networks allows providing end users with access to IP services. Provided services
- High-speed Internet access
- Video stream, High Definition TV, IPTV, Video on Demand (VoD), video conference
- Online educational and entertainment programmes
- 1 GPON port
- Gigabit router
- RF port for CaTV service providing
-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile” solution. This solution reduces the amount of cable and provides data transfer with downlink rate up to 2.5 Gbps and uplink rate up to 1.25 Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Universal Devices Integrated 4-port1 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. FXS port enables VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD, printer). Supported services:
- High-speed Internet access
- Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
- VoIP
- Online educational and entertainment programs
- Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
- Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile” solution. This solution reduces the amount of cable and provides data transfer with downlink rate up to 2.5 Gbps and uplink rate up to 1.25 Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Universal Devices Integrated 4-port1 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. FXS port enables VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD, printer). Supported services:
- High-speed Internet access
- Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
- VoIP
- Online educational and entertainment programs
- Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
- Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
-
ONT NTP are the high-performance multi -function user terminals intended for access to advanced telephony services and high speed Internet. In addition, the user terminals of the RG series provide users with extendedopportunities to work in a local network.
PON technology
GPON technology is one of the most modern and efficient "last mile" solutions, allowing significant savings oncabling infrastructure and providing data rates of up to 2.5 Gb/s in downlink direction and 1.25 Gb/s in the uplink direction. The use of solutions based on the GPON technology in access networks gives the ability to provide the end-user with an access to a set of services on the basis of IP.Universal devices
A built-in Gigabit 4-Port 10/100/1000 Base-T router allows organizing a high-speed connection of devices in a network. 2 FXS ports allow using the services of IP-telephony. Devices with a built-in triplexer have an RF-output that connects to a TV to view analogue or digital cable TV (provided the service is available from the operator). The USB port can be used to connect USB-devices (USB-flash drive, external HDD) or to connect a printer.Available services
- High-speed internet access
- Streaming video/High Definition TV/IP TV, video on demand (VoD), video conferencing
- Cable TV (CaTV)
- IP-telephony
- Online entertainment and educational programs
Applications
- Connecting subscribers to broadband services in apartment buildings, residential complexes, campusesand cottage settlements
- Building corporate networks at large strategic enterprises, business centers with high security requirements and data rate requirements
Wireless
Subscriber units support connection on standard IEEE 802.11b/g/n on the 2.4GHz and the 2.4/5 GHz (optional) frequency.