• RTN910 simaxcom huawei RTN910RTN980 simaxcom huawei Datasheet install

    RTN 910

    2 out of 5
    The OptiX RTN 910 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
  • RTN950 simaxcom huawei RTN950RTN980 simaxcom huawei Datasheet install
    The OptiX RTN 950 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
  • RTN980 simaxcom huawei RTN980RTN980 simaxcom huawei Datasheet install
    The OptiX RTN 980 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
  • SFP (1.25G) module, 550m, Multi Mode S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
    REQUEST
  • SFP CWDM module 1.25G 40km 1530nm Dual LC-connector DDM
    REQUEST
  • RJ45 SFP 10/100/1000M copper module S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately.
    REQUEST
  • SKD Board LTP-16N

    $4,080.00
    SKD Board LTP-16N Up to 16 PON ports, 1U case Hot-swappable redundant power units Remote management via CLI, SNMP Compliance with G.988, G.984.x and TR-156 standards Ability to provide cable television together with data transmission Optimal solution for a small village or apartment building
  • SKD Board NTU-RG-5421G-Wac 1 GPON port Gigabit router FXS port for analogue phone connection USB 2.0 port for USB drive or printer connection ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT services as well as high-speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities.
  • Spectronite A10 simaxcomSpectronite A10 simaxcom
    With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected Integrates Spectronite A10 revolutionary LinkProtect technology and optimized transmit power to fight against the side-effect of high-capacity transmission. LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link robustness, smaller antennas and longer distance.
  • SPECTRONITE simaxcom S10SPECTRONITE simaxcom S10
    With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected. Spectronite S10 brings revolutionary innovations to fight against the side-effect of high-capacity transmission. With LinkProtect technology, microwave links get more robust than ever before. Extending power control and adaptive modulation, LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link sensitivity. Planning a network with LinkProtect provides unprecedented fade margin to reach aggressive availability figures, while keeping antenna size at the lowest.
  • The SXT LTE kit (product code RBSXTR&R11e-LTE) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t. In comparison with our first generation model RBSXTLTE3-7, the SXT LTE kit is powered by faster CPU and supports not only LTE with more speeds, but also 2G and 3G, as well as much wider band range. The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. The unit includes a 24 V power supply, but can support full range of 12-57 V and 18-57 V with PoE-Out and is 802.3af/at compliant. The device has a built in high quality 2G/3G/4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link. RBSXTR&R11e-LTE includes LTE modem that supports International LTE bands 1, 2, 3, 7, 8, 20, 38 and 40.
    REQUEST
  • The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. - SXTsq 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- SXTsq 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
    REQUEST
  • The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
    REQUEST
  • The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices. LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train. RBwAPR-2nD&R11e-LTE includes LTE modem that supports International LTE bands 1,2,3,7,8,20,38 and 40.
    REQUEST
  • Wireless Controllers simaxcom nitrowaveWireless Controllers simaxcom nitrowave
    Wireless Controllers (WNMS) help reduce overall operational expenses by simplifying network deployment, operations, and management. NITROWAVE continuing threats with the best way to work and solutions can help you manage your network and cost. In NITROWAVE can with the most powerful controller wireless to help decrease the costs of simplifying operational deployment of the network operations and management.
  • y-packet simaxcom micrany-packet simaxcom micran
    Y-packet is the high capacity packet full outdoor platform, realized to meet the requirements of WISP, ISP and Corporate markets alike. Y-Packet has been developed with an aim to be easy to install, inter-operable with other equipment in the network, and easily integrated with third parties Network Management Systems.
  • Y-trunk simaxcom micran Y-trunkY-trunk simaxcom micran Y-trunk
    Y-Trunk is a new Micran trunk radio capable of supporting up to 3.6 Gbps of aggregate data traffic. It provides up to 8 RF channels in one sub-rack chassis supporting 1024QAM; it gives operators great advantage in achieving higher link capacity. Y-Trunk can transport any mix of E1, STM1 and Ethernet, so we support any kind of networks: legacy TDM, Hybrid and pure Packet. This makes this equipment the best choice for operators to migrate towards all-IP networks. It has been designed for high flexibility and resiliency: we can provide different radiochallel configurations with range of protection schemes - Y-Trunk is the Micran’s platform for deploying high capacity microwave links to substitute optical fiber