- 1 GPON port
- Gigabit router
- FXS port for analogue phone connection
- USB 2.0 port for USB drive or printer connection
-
Details -
This NetMetal version is equipped with a miniPCI-express slot a SIM slot for 3G/4G device or additional wireless card, a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure (IP54). Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for its high output power radio. The NetMetal is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license. - RB922UAGS-5HPacD-NM-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - RB922UAGS-5HPacD-NM (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). -
NTU-RG-5421G-Wac (AP) – a high performance multifunctional subscriber terminal that is designed to access modern telephony, IPTV, OTT services as well as highspeed Internet. Furthermore, NTU-RG-5421G-Wac allows carriers to offer their clients a wide range of services and opportunities to work in a local network.Key features
- 1 GPON port
- Gigabit router
- FXS port for analogue phone connection
- USB 2.0 port for USB drive or printer connection
- Wi-Fi 802.11a/b/g/n
- Wi-Fi 802.11a/a/n/ac
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:- 4хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:- 8хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
OLT MA4000-PX
$728.91Multi-service access and aggregation node MA4000-PX allows to construct access networks based on GPON technology. The OLT allows an operator to construct scalable, failsafe "last mile" networks, ensuring high safety requirements in either urban or rural areas. MA4000-PX controls customer stations, traffic switching and transport network access.A core element of the MA4000-PX is a scalable Ethernet L2+ switch (PP4X) that interacts with optical interface access modules PLC8 to connect customer devices via GPON technology.The modules are installed in a standard 19" 9U Eurocase. The 9U case has two slots for PP4X switch circuit control modules installation and 16 slots for linear PCL8 modules (GPON). A single system can have one or two PP4X central switch control modules.Types of modules- PP4X: switching and control module
- PLC8: 8 x GPON 2,5Gbps interface module
- The quantity of interface modules: up to 16
- Bus type and performance: 34х10GBASE-KX (XAUI), 680Gbps
- Single management interface via CLI (Telnet, SSH, serial), SNMP
- Processing of configuration data of all modules
- Support for RADIUS, TACACS+
-
System designers and builders rely on consistent storage products. Kingston off ers the following benefi ts with the Design-In SSD product line: • Controlled BOM and Firmware - Ensures there are no changes to key components after customer qualifi cation. • PCN Support - All generational changes and fi rmware updates are handled through a controlled and timed process. • Engineering Support – Customers have a direct contact to their regional Kingston Field Application Engineering teams for fast response to storage requirement questions and support requests. • Global Support – Kingston can coordinate SSD deliveries with a customer’s Original Design Manufacturers (ODMs) or Contract Manufacturers (CMs) in other regions of the world, if required • Warranty* — For peace of mind, our Design-in SSDs are backed by a limited three-year warranty and free technical support. -
ONT NTP are the high-performance multi -function user terminals intended for access to advanced telephony services and high speed Internet. In addition, the user terminals of the RG series provide users with extendedopportunities to work in a local network.
PON technology
GPON technology is one of the most modern and efficient "last mile" solutions, allowing significant savings oncabling infrastructure and providing data rates of up to 2.5 Gb/s in downlink direction and 1.25 Gb/s in the uplink direction. The use of solutions based on the GPON technology in access networks gives the ability to provide the end-user with an access to a set of services on the basis of IP.Universal devices
A built-in Gigabit 4-Port 10/100/1000 Base-T router allows organizing a high-speed connection of devices in a network. 2 FXS ports allow using the services of IP-telephony. Devices with a built-in triplexer have an RF-output that connects to a TV to view analogue or digital cable TV (provided the service is available from the operator). The USB port can be used to connect USB-devices (USB-flash drive, external HDD) or to connect a printer.Available services
- High-speed internet access
- Streaming video/High Definition TV/IP TV, video on demand (VoD), video conferencing
- Cable TV (CaTV)
- IP-telephony
- Online entertainment and educational programs
Applications
- Connecting subscribers to broadband services in apartment buildings, residential complexes, campusesand cottage settlements
- Building corporate networks at large strategic enterprises, business centers with high security requirements and data rate requirements
Wireless
Subscriber units support connection on standard IEEE 802.11b/g/n on the 2.4GHz and the 2.4/5 GHz (optional) frequency. -
NTU series ONT are high performance multifunctional subscriber terminals that are designed to provide access to modern telephony, IPTV, OTT services as well as high-speed Internet. PON technology PON technology - one of the most effective last mile solutions today. The technology helps to reduce costs for cable infrastructure and ensures data rates of 2.5 Gbps downlink and 1.25 Gbps uplink. The use of PON technology in access networks allows providing end users with access to IP services. Provided services- High-speed Internet access
- Video stream, High Definition TV, IPTV, Video on Demand (VoD), video conference
- Online educational and entertainment programmes
- 1 GPON port
- Gigabit router
- RF port for CaTV service providing
-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile”solution. This solution reduces the amount of cables and provides data transfer with downlink rate up to 2.5Gbps and uplink rate up to 1.25Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Supported services High-speed Internet access Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing VoIP Online educational and entertainment programs Applications Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates -
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile” solution. This solution reduces the amount of cable and provides data transfer with downlink rate up to 2.5 Gbps and uplink rate up to 1.25 Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Universal Devices Integrated 4-port1 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. FXS port enables VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD, printer). Supported services:- High-speed Internet access
- Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
- VoIP
- Online educational and entertainment programs
- Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
- Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile” solution. This solution reduces the amount of cable and provides data transfer with downlink rate up to 2.5 Gbps and uplink rate up to 1.25 Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Universal Devices Integrated 4-port1 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. FXS port enables VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD, printer). Supported services:- High-speed Internet access
- Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
- VoIP
- Online educational and entertainment programs
- Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
- Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities.PON Technology
PON Technology is the most modern and effective “last mile”solution. This solution reduces the amount of cables and provides data transfer with downlink rate up to 2.5Gbps and uplink rate up to 1.25Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol.Universal Devices
Integrated 4-port 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. 2 x FXS ports enable VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD).Supported services
- High-speed Internet access
- Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
- VoIP
- Online educational and entertainment programs
Applications
- Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
- Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
Wireless Wi-Fi Connection
The NTU-RG-1402G-W user router allows you to connect Wi-Fi clients via IEEE 802.11b/g/n standard. -
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities.PON Technology
PON Technology is the most modern and effective “last mile” solution. This solution reduces the amount of cables and provides data transfer with downlink rate up to 2.5Gbps and uplink rate up to 1.25Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol.Universal Devices
Integrated 4-port 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. 2 x FXS ports enable VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD).Supported services
- High-speed Internet access
- Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
- VoIP
- Online educational and entertainment programs
Applications
- Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
- Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
Wireless Wi-Fi Connection
Customer routers NTU-RG-1422G-Wac supports 802.11ac standard, which allows to reach speeds up to 1,3 Gbps and to deliver modern high-speed services to a client via wireless network. Two internal Wi-Fi network controllers provide the work in two frequency ranges - 2,4 GHz and 5GHz. -
NTU-RG1421G-WZ – a high performance multifunction customer premises terminal that is designed to connect to modern telephony, IPTV, OTT services and for high-speed access to the Internet. Furthermore, NTU-RG series terminals allow providers to offer their clients a wide range of services and opportunity to work in a local network. PON technology - one of the most effective last mile solution today. The technology helps to reduce costs of cable infrastructure and ensures data rates of 2.5 Gbps downlink and 1.25 Gbps uplink. The use of PON technology on access networks allows providing end users with access to IP services. Universal device The integrated gigabit router for 4 ports of 10/100/1000BASE-T ensures high-speed connection on a network. The FXS port provides access to IP telephony services. The USB port can be used for USB device connection (USB flash drive, external HDD, printer). Provided services- High-speed access to the Internet
- Stream video/High Definition TV/IP TV, Video on Demand (VoD), video conference
- IP telephony
- Online educational and entertainment programs
- “Smart home” management
- Providing broadband access services to subscribers in apartment houses, residential areas, campuses or suburban settlements
- orporate network construction at large strategic enterprises or in office buildings with high requirement in terms of security and data transfer rates
-
ONT NTU-RG-5421G-Wac – a high performance multifunctional subscriber terminal that is designed to access modern telephony, IPTV, OTT services as well as highspeed Internet. Furthermore, NTU-RG-5421G-Wac allows carriers to offer their clients a wide range of services and opportunities to work in a local network. The device contains integrated controller for “Smart home” system. The controller provides interaction with sensors and detectors via wireless channel.Key features
- 1 GPON port
- Gigabit router
- FXS port for analogue phone connection
- USB 2.0 port for USB drive or printer connection
- Wi-Fi 802.11a/b/g/n
- Wi-Fi 802.11a/a/n/ac
-
The device NTU-SFP-100 - high-performance mobile terminal, designed for communication with higher-level equipment of passive optical networks and broadband access services to the end user. Connection with GPON networks is provided via PON interface. SFP or SFP + interfaces are for connecting customer’s end equipment. NTU-SFP-100 allows to receive and process untagged or once tagged traffic. The number of services are restricted by OLT opportunities. NTU-SFP-100 can operate in bridge mode (bridge). Using this device may provide the following scheme of traffic transfer from the switch:- transfer untagged traffic to the switch in a specific VLAN (802.1q) or VLAN stack (QinQ)
- transfer of tagged traffic from the switch to a predetermined VLAN transparent or using VLAN manipulation (802.1q tag replacement for another 802.1q tag or label stack)
- transfer of tagged traffic from the switch in the range of VLAN encapsulation in a specific 802.1q tag (selective tunneling)
- the transfer of all traffic from the switch to the encapsulation of a specific label 802.1q (conventional tunneling)
-
PM100-48/12
$63.00Adapter Key Features Input Voltage Range: 36-76V DC, making it suitable for a variety of environments Output Voltage: 12V DC, providing stable power for telecom and network equipment Max Output Power: 100W, designed for high-demand applications Durable Construction: Robust design ensures reliable operation in challenging conditions Wide Operating Temperature Range: -10°C to +45°C, ensuring stable operation in diverse environments Humidity Resistance: Operating humidity range of 5-95% (non-condensing) -
The Cambium Networks PMP 450 is our industry-leading wireless access network platform. Our solution is ideal for industry verticals such as WISPs (Wireless Service Providers), Enterprises and the Government Public Safety Sector. Designed for fixed outdoor applications, the PMP 450 platform is optimized for rate, reach, reliability and throughput. It features the most resilient and effective set of wireless broadband technologies in the marketplace. -
Cambium Networks industry-leading 450 platform includes the all new PMP 450i and PTP 450i radios. The 450i product platform is the most scalable industrial-grade wireless broadband solution available. -
Cambium Networks industry-leading 450 platform includes the all new PMP 450i and PTP 450i radios. The 450i product platform is the most scalable industrial-grade wireless broadband solution available. -
The Cambium Networks PTP 450 is our industry-leading Enterprise level point to point solution platform. This platform is ideal for enterprise services such as data, VoIP, video conferencing video surveillance and backup connection service. The solution can be cost-effectively deployed and configured within hours, providing robust connectivity in any types of environments. -
Cambium Networks industry-leading 450 platform includes the all new PMP 450i and PTP 450i radios. The 450i product platform is the most scalable industrial-grade wireless broadband solution available. -
Cambium Networks disrupts the performance-reliability continuum with the Cambium Point-toPoint PTP 650 Series solution. With up to 450 Mbps aggregate throughput, PTP 650 systems let you reliably and securely handle today’s needs with scalability to meet future requirements.