-
The OptiX RTN 910 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth. -
The OptiX RTN 950 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth. -
The OptiX RTN 980 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth. -
SFP (1.25G) module, 550m, Multi Mode S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. -
SFP CWDM module 1.25G 40km 1530nm Dual LC-connector DDM -
RJ45 SFP 10/100/1000M copper module S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately. -
SKD Board LTP-16N
$4,080.00SKD Board LTP-16N Up to 16 PON ports, 1U case Hot-swappable redundant power units Remote management via CLI, SNMP Compliance with G.988, G.984.x and TR-156 standards Ability to provide cable television together with data transmission Optimal solution for a small village or apartment building -
SKD Board NTU-RG-5421G-Wac
$52.00SKD Board NTU-RG-5421G-Wac 1 GPON port Gigabit router FXS port for analogue phone connection USB 2.0 port for USB drive or printer connection ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT services as well as high-speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. -
With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected Integrates Spectronite A10 revolutionary LinkProtect technology and optimized transmit power to fight against the side-effect of high-capacity transmission. LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link robustness, smaller antennas and longer distance. -
With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected. Spectronite S10 brings revolutionary innovations to fight against the side-effect of high-capacity transmission. With LinkProtect technology, microwave links get more robust than ever before. Extending power control and adaptive modulation, LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link sensitivity. Planning a network with LinkProtect provides unprecedented fade margin to reach aggressive availability figures, while keeping antenna size at the lowest. -
The SXT LTE kit (product code RBSXTR&R11e-LTE) is a device for remote locations that are within cellular network coverage. However, due to it’s professional LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones can’t. In comparison with our first generation model RBSXTLTE3-7, the SXT LTE kit is powered by faster CPU and supports not only LTE with more speeds, but also 2G and 3G, as well as much wider band range. The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. The unit includes a 24 V power supply, but can support full range of 12-57 V and 18-57 V with PoE-Out and is 802.3af/at compliant. The device has a built in high quality 2G/3G/4G/LTE Category 4 modem for speeds of up to 150 Mbit/s downlink and 50 Mbit/s uplink, as well as two Micro SIM slots for backup link. RBSXTR&R11e-LTE includes LTE modem that supports International LTE bands 1, 2, 3, 7, 8, 20, 38 and 40. -
The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner. - SXTsq 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- SXTsq 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
