-
The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless AP with antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter. -
RTN 905 is ready for a variety of synchronization scenarios, no matter RTN alone or synergy with other venders,It Supports the following clock:- PDH tributary clock
- Radio link clock
- TDM cascading interface clock
- 2048 kbit/s or 2048 kHz external clock
- Synchronous Ethernet clock
- IEEE 1588 V2(TC/BC)
-
The OptiX RTN 910 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth. -
The OptiX RTN 950 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth. -
The OptiX RTN 980 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth. -
SFP (1.25G) module, 550m, Multi Mode S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. -
SFP CWDM module 1.25G 40km 1530nm Dual LC-connector DDM -
RJ45 SFP 10/100/1000M copper module S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, by popular demand is now also available for purchase separately. -
SKD Board LTP-16N
€4,080.00SKD Board LTP-16N Up to 16 PON ports, 1U case Hot-swappable redundant power units Remote management via CLI, SNMP Compliance with G.988, G.984.x and TR-156 standards Ability to provide cable television together with data transmission Optimal solution for a small village or apartment building -
SKD Board NTU-RG-5421G-Wac
€52.00SKD Board NTU-RG-5421G-Wac 1 GPON port Gigabit router FXS port for analogue phone connection USB 2.0 port for USB drive or printer connection ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT services as well as high-speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. -
With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected Integrates Spectronite A10 revolutionary LinkProtect technology and optimized transmit power to fight against the side-effect of high-capacity transmission. LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link robustness, smaller antennas and longer distance. -
With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected. Spectronite S10 brings revolutionary innovations to fight against the side-effect of high-capacity transmission. With LinkProtect technology, microwave links get more robust than ever before. Extending power control and adaptive modulation, LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link sensitivity. Planning a network with LinkProtect provides unprecedented fade margin to reach aggressive availability figures, while keeping antenna size at the lowest.
