• PTP 810 cambium networks simaxcomPTP 810 cambium networks simaxcom
    Our highly-flexible, convenient Cambium Point-to-Point PTP 810 Licensed Microwave Solutions are designed to help you make this transition smoothly and cost-effectively. Our advanced PTP 810 technology platform is designed to provide the carrier-grade reliability and high performance necessary to address your current and future network needs as you migrate from legacy TDM technology to a packetbased environment.
  • ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities.

    PON Technology

    PON Technology is the most modern and effective “last mile”solution. This solution reduces the amount of cables and provides data transfer with downlink rate up to 2.5Gbps and uplink rate up to 1.25Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol.

    Universal Devices

    Integrated 4-port 10/100/1000 Base-T Gigabit router allows to create a high-performance connection for network devices. 2 x FXS ports enable VoIP services. The USB port can be used for USB-enabled devices (USB flash drives, external HDD).

    Supported services

    • High-speed Internet access
    • Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing
    • VoIP
    • Online educational and entertainment programs

    Applications

    • Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements
    • Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates

    Wireless Wi-Fi Connection

    The NTU-RG-1402G-W user router allows you to connect Wi-Fi clients via IEEE 802.11b/g/n standard.
  • mAP

    Dual-Chain 2.4GHz micro AP, 650MHz CPU, 64MB RAM, 2xEthernet, PoE out The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
    REQUEST
  • SKD Board NTU-RG-5421G-Wac 1 GPON port Gigabit router FXS port for analogue phone connection USB 2.0 port for USB drive or printer connection ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT services as well as high-speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities.
  • cnMedusa PMP 450m simaxcom cambium networkscnMedusa PMP 450m simaxcom cambium networks
    The PMP 450m Access Point (AP) with cnMedusa™ Massive MU-MIMO technology enables network operators to rapidly provide faster Internet connections to significantly more people, places, and things. cnMedusa™ will absolutely change the commercial wireless broadband industry. Massive MU-MIMO technology delivers ground-breaking spectral efficiency in a highly integrated package, while being managed from a single pane of glass in the Cloud.
  • y-packet simaxcom micrany-packet simaxcom micran
    Y-packet is the high capacity packet full outdoor platform, realized to meet the requirements of WISP, ISP and Corporate markets alike. Y-Packet has been developed with an aim to be easy to install, inter-operable with other equipment in the network, and easily integrated with third parties Network Management Systems.
  • The MES Access switch is a controlled switch of L2+ level that have 48 ports 10/100/1000Base-T and 4 ports 10GBase-X (SFP+)/1000Base-X (SFP). Switches provide end-user connection to the network of big businesses, small and medium-sized businesses and connection to the network of communication providers via Gigabit Ethernet interfaces. Switch functionalities provide physical stacking, support of VLAN and multicast groups and extended safety services.
    • L2+ switches
    • Stacking support
    • Multicast support (IGMP, IGMP snooping, MVR)
    • Extended safety services (L2-L4 ACL, IP Source address guard, Dynamic ARP Inspection and etc.)
  • 2.4GHz AP, 5x Ethernet, 5x Gigabit Ethernet, SFP cage, USB, LCD, PoE output on Eth10, 600MHz CPU, 128MB RAM The RB2011Ui is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.
    REQUEST
  • Cost-Effective Wireless Device with External Antenna Support ▪️ Equipped with a 750MHz QCA 9563 CPU, a QCA 9882 radio, and 64MB RAM/16MB Flash Memory, the LigoDLB 5ac brings efficiency to the next level. ▪️ The state-of-the-art RF design with N connectors for external antennas delivers great output power, improves range, and enables capacity over 256QAM. ▪️ +500Mbps of throughput—the result of a powerful hardware platform with an 802.11ac technology-based radio and the iPoll proprietary data transmission protocol. ▪️ The LigoDLBac Series is backward-compatible with LigoDLB using iPoll, extending the lifetime of DLB devices and making network expansion and upgrading straightforward and inexpensive.
    REQUEST
  • OLT MA4000-PX

    $728.91
    Multi-service access and aggregation node MA4000-PX  allows to construct access networks based on GPON technology. The OLT allows an operator to construct scalable, failsafe "last mile" networks, ensuring high safety requirements in either urban or rural areas. MA4000-PX controls customer stations, traffic switching and transport network access.
    A core element of the MA4000-PX is a scalable Ethernet L2+ switch (PP4X) that interacts with optical interface access modules PLC8 to connect customer devices via GPON technology.
    The modules are installed in a standard 19" 9U Eurocase. The 9U case has two slots for PP4X switch circuit control modules installation and 16 slots for linear PCL8 modules (GPON). A single system can have one or two PP4X central switch control modules.
    Types of modules
    • PP4X: switching and control module
    • PLC8: 8 x GPON 2,5Gbps interface module
    • The quantity of interface modules: up to 16
    • Bus type and performance: 34х10GBASE-KX (XAUI), 680Gbps
    Management and monitoring
    • Single management interface via CLI (Telnet, SSH, serial), SNMP
    • Processing of configuration data of all modules
    • Support for RADIUS, TACACS+
  • Solution for enterprise WEP-1ac Smart provides high-performance, secure, accessible and easy to use wireless network that combines numerous features and services required by corporate clients. WEP-1ac Smart is a universal solution that may be used for organization of wireless networks in highly crowded areas and high traffic environments (offices, state institutions, conference halls, laboratories, hotels, etc.) Wireless connection With support of IEEE 802.11n/ac standards WEP-1ac Smart provides 867 Mbps (5GHz) + 300 Mbps (2.4 GHz) data rates.. The Smart antenna technology used at 5 GHz is based on more than 700 optimized antenna patterns that switch dynamically while access point operation. WEP-1ac Smart analyzes customer and noise source location and uses the best antenna pattern for every moment of time.
    • Smart antennas technology support
    • High-performance solution based on Broadcom chipset
    • Dual band access point with 802.11ac support
    • Power supply: PoE+ (IEEE 802.3at)
    • Operation in cluster without a dedicated server (up to 64 devices)
    • Seamless roaming
    • Up-to-date authentication and encryption means
  • The switches provide end users connection to the networks of large enterprises, small and medium-sized businesses and service provider networks using Fast and Gigabit Ethernet interfaces .
    The access switches support physical stacking, VLANs and multicast groups, as well as advanced security features.
    Uninterruptible power supply
    MES1124MB and MES2124MB switches have the ability to connect storage battery in order to provide uninterruptible power in case of 220V supply line failure.
    The switches are equipped with the power supply unit that allows charging of storage battery if the 220V supply line is available.  The  power system provides monitoring of power supply line and notifies of power source switching.
    Protection against voltage surges
    MES switches are equipped with efficient protection technology against voltage surges (up to 6 kV) caused by lightning discharges.