-
ONT NTU are high-performance network terminals which are designed for providing access to voice services, IPTV, OTT, high speed Internet. Also, with NTU-RG series optical network terminals, operators will be able to provide their subscribers with a wide range of local network operation services and capabilities. PON Technology PON Technology is the most modern and effective “last mile”solution. This solution reduces the amount of cables and provides data transfer with downlink rate up to 2.5Gbps and uplink rate up to 1.25Gbps. PON-based solutions in access networks allow end users to have access to a set of services based on IP protocol. Supported services High-speed Internet access Video streaming/ High Definition TV/IP TV, Video on Demand (VoD), Video conferencing VoIP Online educational and entertainment programs Applications Providing of broadband access services to subscribers located in apartment houses, residential areas, campuses or suburban settlements Corporate network construction at large strategic enterprises, or in office buildings with high requirements in terms of security and data transfer rates
-
OLT MA4000-PX
$728.91Multi-service access and aggregation node MA4000-PX allows to construct access networks based on GPON technology. The OLT allows an operator to construct scalable, failsafe "last mile" networks, ensuring high safety requirements in either urban or rural areas. MA4000-PX controls customer stations, traffic switching and transport network access.A core element of the MA4000-PX is a scalable Ethernet L2+ switch (PP4X) that interacts with optical interface access modules PLC8 to connect customer devices via GPON technology.The modules are installed in a standard 19" 9U Eurocase. The 9U case has two slots for PP4X switch circuit control modules installation and 16 slots for linear PCL8 modules (GPON). A single system can have one or two PP4X central switch control modules.Types of modules- PP4X: switching and control module
- PLC8: 8 x GPON 2,5Gbps interface module
- The quantity of interface modules: up to 16
- Bus type and performance: 34х10GBASE-KX (XAUI), 680Gbps
- Single management interface via CLI (Telnet, SSH, serial), SNMP
- Processing of configuration data of all modules
- Support for RADIUS, TACACS+
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:
- 8хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:
- 4хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
RTN 905 is ready for a variety of synchronization scenarios, no matter RTN alone or synergy with other venders,It Supports the following clock:
- PDH tributary clock
- Radio link clock
- TDM cascading interface clock
- 2048 kbit/s or 2048 kHz external clock
- Synchronous Ethernet clock
- IEEE 1588 V2(TC/BC)
-
The OptiX RTN 980 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
-
The OptiX RTN 950 supports high-efficient encapsulation technology and provides theframe header compression function at air interfaces to increase the throughput of packetservices. When the frame header compression function is disabled, the throughput reachesa maximum of about 500 Mbit/s upon 56 MHz channel bandwidth. When the frame headercompression function is enabled, the throughput reaches a maximum of 1000 Mbit/s upon56 MHz channel bandwidth.
-
Microwave radio always played a key role in mobile backhauling, becoming the predominant technology in use. With the evolution of mobile technology, microwave radio has evolved to t those requirements, always oering new and innovative way to enable fast RAN deployments. ALFOplus2 is the next generation 2/4 Gbps full outdoor solution to enable successful launch of LTE, by providing best TCO while boosting capacity and availability of the network.
-
ALFOplus is a Full Outdoor, Full IP Next Generation Microwave Radio. It is a zero footprint solution, fully integrable with 3G, 4G and LTE nodes, and ideal for a fast and exible evolution towards full IP networks with the highest radio capacity and performance. With its advanced Ethernet features and complete synchronisation management (SyncE and 1588v2), ALFOplus is a state of the art IP radio, providing the foundation for a leading edge network.
-
With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected Integrates Spectronite A10 revolutionary LinkProtect technology and optimized transmit power to fight against the side-effect of high-capacity transmission. LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link robustness, smaller antennas and longer distance.
-
With the growing demand for wireless backhaul capacity, usage of advanced modulation is spreading and wider channels are becoming more popular. As a result, transmission is getting more sensitive to fading and network reliability is strongly affected. Spectronite S10 brings revolutionary innovations to fight against the side-effect of high-capacity transmission. With LinkProtect technology, microwave links get more robust than ever before. Extending power control and adaptive modulation, LinkProtect enables a full dynamic management of the transmission channel, resulting in the strong improvement of the overall link sensitivity. Planning a network with LinkProtect provides unprecedented fade margin to reach aggressive availability figures, while keeping antenna size at the lowest.
-
RAy is a high-speed point-to-point microwave link developed and wholly manufactured by RACOM, a global leader in the development and production of industrial grade wireless equipment.
- 10, 11, 17, 18, 24 GHz
- Narrow channels (1.75 MHz)
- Maximum distances & reliability
- Interference & obstacles tolerant
- Every single unit tested
- Low power consumption
- Full outdoor, easy installation