-
The Cambium Networks PTP 650L is our Enterprise Access and Video Surveillance point to point solution. This platform is ideal for enterprise services such as data, VoIP, video conferencing video surveillance and backup connection services. The solution can be cost-effectively deployed and configured within hours, providing robust connectivity in various LOS/nLOS/NLOS environments including urban environments with reflective NLOS paths.
-
Optical Line Terminal (OLT) is designed to provide broadband access over Passive Optical Network (PON). GPON interfaces are used to connect the optical distribution network (PON). You can connect up to 128 subscriber optical terminals via a single fiber for each interface. Access to the operator's transport network is provided through 10 Gigabit or combined Gigabit uplink interfaces. OLT LTP allow operators to build scalable, fault tolerant "last mile" networks to ensure the highest safety standards. OLT manages subscriber devices, traffic switching and connection to the transport network. Key features:
- 4хPON ports, 1U case
- Hot-swappable redundant power units
- Remote management via CLI, SNMP
- Compliance with G.988, G.984.x and TR-156 standards
- Ability to provide cable TV together with data transmission
- Optimal solution for a small village or an apartment building
-
5x Gigabit Ethernet with PoE output for four ports, SFP, USB, 800MHz CPU, 128MB RAM, RouterOS L4 hEX PoE is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded. It also supports passive PoE input and passive or 802.3af/at PoE output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power at/af mode B (4,5+)(7,8-) compatible devices, if 48-57 input voltage is used.
-
The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, USB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!) There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply.
-
Details
- 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
- 80,000 PPS
- 170 Mbps capacity
- High output power 29 dBm radio
- External N - connectors
- Distance recomendations: Antenna dependent
- Powerful OS
- Smart polling data transmission protocol (iPoll 3)
- Weather proof (IP-67 rated) design
- Free NMS (Infinity Controller)
- Responsive HTML 5 based GUI
- Wall and pole mounting option
-
PTP 820 is a point-to-point licensed microwave backhaul platform that integrates leading networking functionality with the industry’s most advanced microwave technologies creating a superior transport solution.
-
ONT NTU-1 – user terminals intended to connect users to data network based on GPON technology.
Application
NTU-1 was designed for connection to broadband services of apartment buildings, residential complexes and cottage settlements subscribers.The presence of one LAN port allows you to connect your PC, media center or a subscriber router to build a local home network. -
Radome Cover Kit for mANT, reduces wind load, increases antenna operational life Radome Cover Kit is now available for our mANT 30dBi parabolic antennas! It reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life. It's made from a special material that has a low dielectric constant. Wide range of temperature and direct sunlight won't affect it.
-
6GHz Base Station with Integrated Dual-Polarized 18dBi Sector Antenna
▪️ Equipped with a 750MHz QCA 9563 CPU, a QCA 9882 radio, and 64MB RAM/16MB Flash Memory, the LigoDLB 6-90ac brings efficiency to the next level. ▪️ The state-of-the-art RF design with an integrated 18dBi dual-polarized 90° sector antenna delivers great output power, improves range, and enables high-capacity transmission over 256-QAM. ▪️ +500Mbps of throughput—the result of a powerful hardware platform with an 802.11ac technology-based radio and the LigoWave iPoll 3 Proprietary Protocol. -
A scalable solution that’s ideal for smart city, government, and industrial applications, cnPilot™ E500 is designed to support wired or rapid wireless deployments. The enterprise-grade access points enable reliable and secure WiFi service rollout for networks managed by either the service provider or enterprise, and even in remote locations.
-
Y-Trunk is a new Micran trunk radio capable of supporting up to 3.6 Gbps of aggregate data traffic. It provides up to 8 RF channels in one sub-rack chassis supporting 1024QAM; it gives operators great advantage in achieving higher link capacity. Y-Trunk can transport any mix of E1, STM1 and Ethernet, so we support any kind of networks: legacy TDM, Hybrid and pure Packet. This makes this equipment the best choice for operators to migrate towards all-IP networks. It has been designed for high flexibility and resiliency: we can provide different radiochallel configurations with range of protection schemes - Y-Trunk is the Micran’s platform for deploying high capacity microwave links to substitute optical fiber
-
Tiny size home 2.4Ghz AP with three LAN portsThe hAP mini is a small 2GHz wireless access point for home or small offices. It has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options. The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it.