• Adapter

    $3.50
    Adapter This adaptor is specifically designed for the Eltex NTU-RG-5421G-Wac ONT modem. It ensures a perfect fit and reliable performance, making it an essential accessory for maintaining stable network connectivity in homes, offices, and commercial installations
  • AERO simaxcom 3roamAERO simaxcom 3roam
    Full Outdoor High-Capacity Microwave. AERO is 3Roam’s full-outdoor unit for the creation of wireless point-to-point links to interconnect IP networks. High-Performance Connections providing from 10Mbps to 400Mbps over 1km up to +80km distance. Low Installation Costs, the first outdoor product designed for 100% outdoor sites, where competing products require indoor switches, cabinets and expensive rental space.
  • AERO Duo simaxcom 3roamAERO Duo simaxcom 3roam

    AERO Duo

    3 out of 5
    AERO Duo integrates 3Roam’s Adaptive3 technology, combining adaptive power, adaptive coding and modulation for highest link uptime and smaller antennas. High-power radios provide longer links, higher availability at maximum 1024QAM capacity. 3Roam’s AERO Duo provide high transmit power operation at 1024QAM and 512QAM modes through dynamic distortion compensation.
  • AERO HCR simaxcom 3roam AERO HCR simaxcom 3roam
    AERO HCR provides 50 years MTBF and can be configured in 1+1 for increased link reliability. It supports Adaptive Coding and Modulation for backup failure in case of strong rain or desert storms and enhanced error correction such as LDPC. AERO HCR is protected against hackers with AES encryption on the link for data security and SNMP Version 3 support for access security.3Roam’s AERO HCRs are synchronized through the network for clock sensitive applications such as mobile traffic.
  • AERO LH simaxcom 3roamAERO LH simaxcom 3roam
    Secure your Long Haul trunks with space diversity AERO LH integrates up to 16 RF channels in a single chassis for high performance links with frequency diversity, RF band diversity, space diversity and XPIC while providing STM1 and Gigabit Ethernet interfaces.
  • AERO MP simaxcom 3RoamAERO MP simaxcom 3Roam
    Best in class PTP & PTMP with high built-in quality. Offering MIMO 2×2 and dynamic spectrum analysis with zero downtime. Mobility management with advanced handover algorithm and licensed and unlicensed bands (4.9 to 6.4 GHz). Working in harsh environments with ATEX certifications. 3Roam’s AERO MPs are designed with an integrated spectrum analyzer, enabling dynamic frequency hopping for improved performance in spectrum congested areas .
  • AERO Ultra simaxcom 3roamAERO Ultra simaxcom 3roam
    Scale your network to Gigabit through 80 Ghz millimeter waves
    • 4G LTE mobile networks
    • Small cells backhaul
    • Fiber extensions or back-up
    • Government video-surveillance
    • LAN to LAN enterprise
  • MES5324 switches are high performance devices with 10GBASE-R and 40GBASE-SR4/LR4 interfaces that can be used as aggregation or transport switches in carrier networks and as  Top-of-Rack or End-of-Row switches for data centers. The non-blocking architecture guarantees lossless packet forwarding at wire speed with minimum and predictable delays for all types of traffic. The front-to-back cooling provides effective cooldown  in modern data centers. The redundant and hot-swappable fans and AC/DC power supplies with advanced hardware monitoring functions provide high reliability and uninterrupted services.
  • Eltex MES5448 switches provide full Layer 2 and Layer 3 functionality for carrier networks and data centers. MES5448 meets the DC requirements for Top-of-Rack и End-of-Row switches and requirements of service provider for aggregation and backbone networks, providing high performance and cost-effective solution. Key Benefits
    • 48x10GBASE-R/1000BASE-X interfaces
    • 4x40GBASE-LR4/SR4(QSFP) interfaces
    • Bandwidth – 1.28 Tbps
    • L3 switch
    • Non-blocking architecture
    • Stacking up to 8 devices
    • Hot-swappable redundant power supplies
    • Front-to-back cooling
    • Hot-swappable fans
  • ALFOplus simaxcom SIAE MICROELETTRONICA ALFOplus simaxcom SmALFOplus simaxcom SIAE MICROELETTRONICA ALFOplus simaxcom Sm
    ALFOplus is a Full Outdoor, Full IP Next Generation Microwave Radio. It is a zero footprint solution, fully integrable with 3G, 4G and  LTE nodes, and ideal for a fast and exible evolution towards full IP networks with the highest radio capacity and performance. With its advanced Ethernet features and complete synchronisation management (SyncE and 1588v2), ALFOplus is a state of the art IP radio, providing the foundation  for a leading edge network.
  • SIAE MICROELETTRONICA ALFOplus2 simaxcom smSIAE MICROELETTRONICA ALFOplus2 simaxcom sm
    Microwave radio always played a key role in mobile backhauling, becoming the predominant technology in use. With the evolution of mobile technology, microwave radio has evolved to t those requirements, always oering new and innovative way to enable fast RAN deployments. ALFOplus2 is the next generation 2/4 Gbps full outdoor solution to enable successful launch of LTE, by providing best TCO while boosting capacity and availability of the network.
  • The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit. Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount - RB912UAG-5HPnD-OUT-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - RB912UAG-5HPnD-OUT (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
    REQUEST
  • Black aluminium indoor, Fits RB433 series and RBM33G Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products and RBM33G
    REQUEST
  • The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. Device supports IPsec hardware acceleration too. - cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). - cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
    REQUEST
  • 7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1GHz CPU, 2GB RAM, LCD panel, passive cooling desktop enclosure, SmartCard slot, RouterOS L6, PSU The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
    REQUEST
  • 1U rackmount, 12x Gigabit Ethernet, 4xSFP cages, LCD, 36 cores x 1.2GHz CPU, 8GB RAM, 24 mpps fastpath, Up to 16Gbit/s throughput, RouterOS L6, Dual PSU CCR1036-12G-4S is an industrial grade router with cutting edge 36 core CPU. If you need many millions of packets per second - Cloud Core Router with 36 cores is your best choice. The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port. The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!
    REQUEST
  • 1U rackmount, 1x Gigabit Ethernet, 8xSFP+ cages, LCD, 72 cores x 1GHz CPU, 16GB RAM, up to 120 million packets per second, 80Gbps throughput, RouterOS L6 Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilize this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports and single Ethernet port for management purposes. The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage. Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.
    REQUEST
  • cnMedusa PMP 450m simaxcom cambium networkscnMedusa PMP 450m simaxcom cambium networks
    The PMP 450m Access Point (AP) with cnMedusa™ Massive MU-MIMO technology enables network operators to rapidly provide faster Internet connections to significantly more people, places, and things. cnMedusa™ will absolutely change the commercial wireless broadband industry. Massive MU-MIMO technology delivers ground-breaking spectral efficiency in a highly integrated package, while being managed from a single pane of glass in the Cloud.
  • cnPilot E400 simaxcom cambium networkscnPilot E400 simaxcom cambium networks
    Designed for wireless service providers of both enterprise and distributed enterprise networks, cnPilot™E400 offers WLAN that is scalable, secure, and reliable. The enterprise-grade 802.11ac access points support on-premise or cloud management in a solution that rolls out quickly, blends in to the environment and is easy to operate.
  • cnPilot E500 simaxcom cambium networkscnPilot E500 simaxcom cambium networks
    A scalable solution that’s ideal for smart city, government, and industrial applications, cnPilot™ E500 is designed to support wired or rapid wireless deployments. The enterprise-grade access points enable reliable and secure WiFi service rollout for networks managed by either the service provider or enterprise, and even in remote locations.
  • cnPilot R200P simaxcom cambium networks
    Extending the service provider’s indoor reach and streamlining components for a simplified indoor network. Versatile multi-function WLAN access points, offering remote visibility and end-to-end troubleshooting, extend the service provider’s indoor reach.
  • cnPilot R200P simaxcom cambium networks
    Extending the service provider’s indoor reach and streamlining components for a simplified indoor network. Versatile multi-function WLAN access points, offering remote visibility and end-to-end troubleshooting, extend the service provider’s indoor reach.
  • cnPilot R201 simaxcom cambium networkscnPilot R201 simaxcom cambium networks
    Extending the service provider’s indoor reach and streamlining components for a simplified indoor network. Versatile multi-function WLAN access points, offering remote visibility and end-to-end troubleshooting, extend the service provider’s indoor reach.
  • cnPilot R201 simaxcom cambium networkscnPilot R201 simaxcom cambium networks
    Extending the service provider’s indoor reach and streamlining components for a simplified indoor network. Versatile multi-function WLAN access points, offering remote visibility and end-to-end troubleshooting, extend the service provider’s indoor reach.